3-Stage Rotary Table Washer 

The Arnold Machine 3-Stage Rotary Table Washer is a general-purpose washer suited for low-volume parts, batch cleaning, and multiple part sizes and geometries.  The machine is ideal for large machined parts such as engine blocks, transmission housings, pump and gear housings, either in the initial manufacturing stage or in the remanufacturing industry.

The machine features a proven design of over 40 years with an open table and the ability to add custom fixtures for specific parts.  The cycle consists of a timed heated wash cycle and a timed heated rinse cycle, both of which are supplemented by high-pressure spray heads.  The drying stage features a high-pressure heated blower and a timed cycle to ensure parts are dried to the requirements of each cycle.

Request a Quote

Standard Features and Benefits

  • Completely manufactured in the United States
  • The base machine is constructed out of 10ga stainless steel and features 2” insulation covered with 16ga polished stainless steel
  • Plumbing is 304 schedule 40 stainless steel pipe
  • Tank floors are pitched to a 2” stainless steel rain valve
  • Available in 36”, 48”, and 60” diameter tables
  • Stainless steel bag filters for wash and rinse tanks
  • Stainless steel liquid level float switches to control tank levels
  • Solenoid valve for automating the make-up of wash and rinse tank water levels
  • Lift off access covers on the top of the tanks, providing access to chip & debris collection baskets
  • Large tank doors for easy access for cleaning and maintenance
  • Filter change alert on the touchscreen display
  • Customizable cleaning recipes allowing simple changeover between different parts and cleaning requirements
  • Integrated fork pockets
  • 1-year parts & labor warranty on components & workmanship, and 10-year limited warranty on structural integrity

Common Applications

The machine is ideal for large machined parts such as engine blocks, transmission housings, pump and gear housings, either in the initial manufacturing stage or in the remanufacturing industry.

Specs and Options

  •  40” operator load height with stainless steel load table, working height inside the cabinet is 39”
  • The table has a load capacity of 2,000 lbs evenly distributed
  • Utility Requirements
    • 480 VAC - 3 phase - 60 Hz - 200 AMP power
    • ⅜”, 80 PSI compressed air
    • 1”, 35 PSI fresh water supply
    • Two 2” NPT tank drains
  • Control System
    • NEMA 12 main control panel with sequester 480V, 200-amp main disconnect
    • UL approved 24 VDC controls package with Allen-Bradley CompacLogix PLC and Weintek 10” touch screen control panel
    • Pre-programmed wash cycle recipes customizable to specific needs
  • 200gal wash and rinse tanks, each with 15hp, 100gpm wash pump, 5hp, 100gpm rinse pump and 30kw electric heaters
  • 7.5hp, 700cfm centrifugal dry off blower with 24kw electric heat
  • 1hp table rotate drive motor with fixed speed and forward and reverse jog buttons on the touchscreen
  • Intermediate wash spray holder

Optional Items

  • Foot Pedal Jog
  • Exhaust Fan
  • Mist Collector
  • 25-gal Coalescing Oil Removal System (can be added to wash and/or rinse circuits)
  • Automatic Chemical Monitoring & Addition
  • Noise Reduction Package
  • Single Point Tank Drain
  • Canadian CSA Certification
  • Service Plan Options
  • Remote Diagnostic Access
  • Customized Fixturing

3-Stage Rotary Table Washer FAQ

  • My parts vary greatly in size and shape. Can automatic spray coating machines handle this kind of diversity?

  • How does an automated paint sprayer system affect the work environment compared to manual spraying?

  • I'm concerned about the complexity of transitioning to an automated system. What support do you offer?